180
Strenx Section 700

Strenx® Section 700

Advanced high-strength, cold-formed steel section

Strenx® Section 700 is a cold-formed steel section made of hot-rolled, high-strength steel with a minimum yield strength of 700 MPa.

Its high-strength combined with naturally stiff form enables construction of stronger and lighter structures. Typical applications include demanding load-bearing structures in the lifting, handling and transportation segments.

The steel in Strenx® Section 700 meets or exceeds the requirements of EN 10149-2. Its tolerances meet or exceed, when applicable, the requirements of EN 10162.

Strenx® Section 700 is available as U-section。 Other shapes and variations are available upon request。

The maximum length of the sections is 21 meters, cut-to-length sections are available upon request.

Dimension Range

新疆11选5Strenx® Section 700 is available as U-section。 Other shapes and variations are available upon request。

   
Bottom length 50 - 400 mm 
Side length 30 - 200 mm 
Wall thickness 2.5 - 10.0 mm
Max. length 21 000 mm

Available Standards

新疆11选5

EN 10149-2

EN 10162

EN 1090-2

Strenx® Section 700

Strenx® Section 700

USED FOR
DIMENSIONS
STANDARDS
DATA SHEET
USED FOR

DIMENSIONS

T: 2.5 - 10 mm

L: Up to 21000 mm

STANDARDS

EN 10149-2

EN 10162

EN 1090-2

DATA SHEET

广西快乐十分走势图 甘肃11选5走势图 陕西11选5 陕西11选5 陕西快乐十分走势图 陕西快乐十分投注 陕西11选5走势图 陕西11选5开奖 陕西快乐十分投注 重庆百变王牌走势图